- 目录
第1篇 工程项目电气监理工程师岗位职责
工程项目电气监理工程师的岗位职责
(1)对总监理工程师负责,按合同文件要求负责电气、设备、安装等工程的监理工作 ;
(2)参与编写项目监理规划,负责编制本专业的监理实施细则;
(3)熟悉合同条款及规范、设计图纸,在施工过程中对质量进度进行全面控制 , 对施工中出现的问题,按合同文件要求,提出处理意见;
(4)审查承包人提出的工程进度计划和施工组织计划,提出审查意见供总监理工程师审批时参考,并对计划的执行情况进行检查和监督;
(5)负责本专业分项工程验收及隐蔽工程验收,检查电气、设备工程的放样及承包人对测量标志的保护措施;
(6)审查施工图纸,必要时对需要纠正的地方提出处理意见并报总监理工程师审查;
(7)审查承包人提出的施工图、竣工图及变更设计图,并报告总监理工程师,必要时转报业主,以便作出变更设计的安排;
(8)审查承包人的分项工程施工方案,提出是否同意开工的意见,报总监理工程师审批,要经常深入工地,详细检查施工的各部位环节,批准或不批准承包人的检验申请,对承包人施工中存在的问题应建议总监理工程师签发工作指令或监理通知单;
(9)审定工程计量、配合合同计量工程师审查承包人支付月报 ,经总监理工程师审核后上报业主;
(10)填写监理日记并审 l 涌现场监理人员的监理日记;
(11)同合同计量工程师一起提出有关索赔、延期及变更问题的处理意见,并报总监理工程师;
(12)与道路工程师沟通,协调电气、设备安装与道路工程的施工,检查预埋件的布置和埋设;
(13)办理总监理工程师交办的其它工作。
第2篇 项目电气工程师岗位职责
电气工程师(周口新项目) 郑州万科房地产有限公司 郑州万科房地产有限公司分支机构 职责描述:
1、负责电气专业范围内的方案工作,确保方案及进度达到整体进度要求,方案及设计质量符合国家规范、行业标准及企业内部标准;
2、协调电气专业方案、设计与相关土建、水暖、市政、园林工程之间的关系,协调市政电的方案及报批报建工作,确保电气工程达到设计与规范要求。
任职要求:
1、本科以上学历,电气管理相关专业;
2、有完整项目工作经验;
3、熟悉国家及本地与本专业有关的规范要求;
4、具备较熟练现场处理、协调、沟通能力及技巧。
第3篇 项目电气工程师工作岗位职责
(1)工作原则:有章可循,有法可依;
(2)岗位程序:写你要做的,做你要写的,记你所做的,查你做过的,改你做错的,验你改过的;
(3)负责本工程相应专业技术管理工作;
(4)审核设计文件,熟悉文件内容,实地核对,并根据施工调查资料对设计中存在的问题及时请监理或设计单位解决;
(5)编制施工组织设计,制定相应的安全、质量措施;
(6)汇总和提报工程材料及设备需用计划,并协助物资部门解决定货中的技术问题;
(7)处理各种施工问题,掌握工程进度,了解安全、质量情况;
(8)整理本专业的竣工资料,参与工程竣工验交工作;
(9)参与推广施工中运用新技术、新工艺、新材料工作;
(10)按时、规定提供有关报表,处理有关往来文件。
第4篇 工程项目电气工程师岗位职责（二）
工程项目电气工程师岗位职责(二)
(1)工作原则:有章可循,有法可依;
(2)岗位程序:写你要做的,做你要写的,记你所做的,查你做过的,改你做错的,验你改过的;
(3)负责本工程相应专业技术管理工作;
(4)审核设计文件,熟悉文件内容,实地核对,并根据施工调查资料对设计中存在的问题及时请监理或设计单位解决;
(5)编制施工组织设计,制定相应的安全、质量措施;
(6)汇总和提报工程材料及设备需用计划,并协助物资部门解决定货中的技术问题;
(7)处理各种施工问题,掌握工程进度,了解安全、质量情况;
(8)整理本专业的竣工资料,参与工程竣工验交工作;
(9)参与推广施工中运用新技术、新工艺、新材料工作;
(10)按时、规定提供有关报表,处理有关往来文件。
第5篇 项目电气工程师岗位职责任职要求
项目电气工程师岗位职责
电气工程师-储能项目 abb abb(中国)有限公司 1. technical contribution
_
evaluates， selects and applies standard techniques and procedures to perform engineering assignments.
_
provides rtu， plc based technical support for testing， installation and commissioning activities.
_
take leading and responsible for the project automation solution
_
provide on-site commissioning and troubleshooting of plc software as well as technical support of control system project to customer.
2. sales support
_
prepares project automation related documentation within one’s scope of deliverables.
_
assists in preparing proposal/presentation of engineering projects/programs (provision of bills of materials， estimated engineering hours， etc.).
3. contract management
_
supports contract managers in issuing claims (new/change in scope of work， cost impact， time impact， risk quantifications， etc.).
_
provides quality solutions as per customer requirement and delivers within budget and contract.
_
ensures adherence to safety standards and mitigates potential risks
4. planning and control
_
creates work plans and cost estimates in own area of responsibility
_
reviews and approves scope， budget and schedule for assignments and ensures quality deliverables on time and within targeted cost. improves effectiveness of work plan in collaboration with other functions
5. risk and opportunity management
_
creates and e_ecutes strategies for risk and opportunity management in one’s area of responsibility
_
identifies and manages contract risks taking preventive/corrective actions to resolve any contract/ quality/ program/ cost issues reports any outstanding issues to management， along with recommendations for resolution
6. customer
_
assists customers on technical issues， interacts with official contacts， contractors and other staff within his/her scope of deliverables.
_
assist communication pertaining to specific assignments or meetings
7. supply chain management
_
collaborates with the supply chain function to ensure that technical requirements for equipment or services are communicated and agreed on with potential suppliers
_
provides technical evaluation of supplier proposals and accepts as fit for purpose supplied equipment or services
8. processes and tools
_
uses standard processes and tools applicable to one’s area of responsibility.
_
ensures that engineering activities comply with required safety regulations and contractual requirements.
_
reports processes and tools inefficiencies and suggests improvements ideas.
9. people leadership and development
_
assigns tasks to and coordinates work with entry level engineers， technicians， administrative staff
requirement:
_
bachelor of engineering in electrical engineering (preferably in power systems);
_
minimum of 5 years of e_perience in the field of project e_ecution (plc， rtu， substation designer and or project engineer);
_
be familiar with industrial or power communication protocol; be able to make communication program and analysis the communication fault.
_
e_perienced of using hmi or scada.
_
capability of algorithm design. familiar with industrial algorithm， i.e. sample filter， data compression etc.
_
project e_ecution work e_perience for drives(vsd)， power conversion system， energy storage system， micro-grid and distributed generation etc. is a plus
_
field e_perience (asset);
_
availability to travel domestic and oversea;
_
knowledge of related engineering tools and software required to accomplish his task (autocad， office 365)
_
good communication， critical thinking and analytical skills;
_
must be precise， organized， fle_ible & autonomous;
_
result oriented， independent and fle_ible having the commitment to the business;
_
international culture awareness， ability to communicate and collaborate within global team and with international partners;
项目电气工程师岗位
